REGATTA PRO-START INSTRUCTION SHEET
Instructions2k8
1
6/4/2010
SEQUENCE SELECT BUTTON
SEQUENCE
BEEPER RESPONSE
Apx Q, 1 minute
Apx Q, 2 Minute
Apx Q, 3 Minute
A
px Q, Recall
R
ule 26, 3 Minute
R
ule 26, 5 minute
Rule 26, Recall
Matchrace
P
re-2001 2 minute
P
re-2001 3 minute
P
re-2001 5 minute
NOTE:
See Sequence Selection page for details.
QUICKSTART PROCEDURE
•
Plug RPS into 12 volt power source (ships battery, battery pack, etc)
Verify that the beeper and horn chirp
•
Set
Sequence Select
for desired starting sequence.
•
Depress
Sequence Start
(You are now running a race)
•
See configuration page to change Cycle, Attention, or delay options.
IMPORTANT
•
The horn needs a good electrical connection. While it doesn’t use a lot of
power, it does draw
13 amperes
for short periods. If the ship’s wiring is
light gauge, long, or corroded it can’t supply the power needed at the horn.
Consider a direct wire run to the ships battery.
MANUAL
HORN
SHAPE
ALERT
SELECT
SEQUENCE
SELECT
SEQUENCE
START
REGATTA PRO-START
RESET
PHC
SYSTEMS
www.phcsystems.com
Depress and release
to determine the sequence you are
in.
Depress and hold
to cycle through the sequences.
Release
when you are at the desired sequence
.
Depress and release
to determine the seconds for shape
alert.
Depress and hold
to cycle through the shape alert values
Release
when you are at the desired value.
Depress and release
to start the selected sequence.
Depress
at any time to sound the horn.
Sequences in progress are
not
affected.
Depress
‘Sequence Select’ and ‘Shape Alert Select’
together to reset any sequence in progress.
SHAPE ALERT BUTTON
Sets configuration options as follows:
SEQUENCE
“SHAPE ALERT SELECT”
FUNCTION
Apx Q, 1 minute
Apx Q, 2 Minute
Apx Q, 3 Minute
Apx Q, Recall
Rule 26, 3 Minute
Rule 26, 5 minute
Rule 26, Recall
Matchrace
Pre-2001 2 minute
Pre-2001 3 minute
Pre-2001 5 minute
Sets Apx Q
cycle
Sets Apx Q
Attention
Sets Apx Q
delay
Sets Rule 26
cycle
Sets Rule 26
Attention
Sets Rule 26
delay
Attention
prior to warning
Shape takedown
prior to start
Shape takedown
prior to start
Shape takedown
prior to start
NOTE:
See Configuration page for details.
−
−
−
−−
−
−
−
−
−
−
−−
−
−
−
•
•
•
•
−
−
−
−−
−
−
−
•
•
•
•
•
•
•
•
•
•
•
•
−
−
−
−−
−
−
−
−
−
−
−−
−
−
−
•
•
•
•
−
−
−
−−
−
−
−
−
−
−
−−
−
−
−
−
−
−
−−
−
−
−
−
−
−
−−
−
−
−
−
−
−
−−
−
−
−
