Page - 7
source is light enough. Don’t block the auxiliary light when
it is turned on.
Photo Shooting
The PhaZZer NV3 Day/Night Vision Monocular enters the
photo/view mode automatically after powering the device
on. (Picture 1). You can observe the scenery or take still
photos.
You can take still photos by pressing the “Power/OK”
(button ”#13”) with one short press. Each press takes one
still photo. The photo will be saved automatically to the TF
card.
The remaining image capacity is counted by the storage
in the TF card and will be displayed on the screen. The
capacity is approximate and may vary slightly from actual
capacity.
Video and Playback Functions
Video
In the photo/view mode, short press “M” (Mode button
#14) to activate the video mode. Press the “Power/OK”
(button #13) to start the video (shown as “START”). The
time shown in the left corner shows the video record time.
Press “Power/OK” (button #13) again to stop the video re-
cording. (shown as “STOP”). In the video mode, the video
clips will be saved in the TF card automatically. When the
video recording ends, time shown in the left corner shows
the remaining time available in the storage of TF card.
Playback
In the photo/view mode, short press the “M” (Mode button
