Phason Supra-RS, Руководство пользователя

Страница: 100 / 152

Chapter 5: Monitoring
100 Phason
Acknowledging alarms
If there are one or more alarms, the Supra activates the alarm relay and displays messages. To
deactivate the relay, and before you can do anything else with the Supra, you must acknowledge the
alarms. If you see an alarm message and are not sure what it means, look it up in the
Alarm
messages
table on page 117 and then follow the instructions for resolving the alarm condition.
If security is enabled, only users who have access to acknowledge alarms can do
so. For more information about security levels, see
Setting up security and users
on
page 94.
If there are alarms, the display looks like this, with your current alarms displayed.
To respond to alarms
1. Press
ENTER
.
The display should look like the following example. If there is an

in the bottom-right corner,
there are more than one screen of alarms to display. Press
Down
to display all the alarms.
2. Press
ENTER
.
If security is not enabled, the alarms are acknowledged and the Main Menu appears. Go to step 5.
If security is enabled, the display should look like the following example.
3. If security is enabled, enter your PIN and then press
ENTER
.
The Supra logs who acknowledges the alarm.
4. Press
ENTER
to go to the Main Menu.
High Temp Probe 1
Actuator 2 Jam
CURRENT ALARMS 1
High Temp Probe 1
Actuator 2 Jam
Acknowledge now
Alarms must be
acknowledged!
Enter PIN: