PFlow Industries P118i, Руководство пользователя

Страница: 41 / 50

P118i Ultrasonic Flowmeter and Analyzer
Reversion: 3.0.0 Page 41 of 49
Working Timer
Display the total working hours of the Flowmeter
since last reset. It is displayed by HH:MM:SS. If it is
necessary to reset it, press , and select "YES".
Alarm #1 Low Value
Enter the low alarm value. Relevant alarm is turned on
in Windows M78 and M79; any of the measured flow,
which is lower than the low value, will activate the
alarm in the OCT hardware or Relay output signal.
Alarm #1 High Value
Enter the high alarm value. Relevant alarm is
turned on in Windows M78 and M79; any of the
measured flow, which is higher than the high value,
will activate the alarm in the OCT hardware or Relay
output signal.
Beeper Setup
Set up the beeper on-off state.
0. ON Beeper ON
1. OFF Beeper OFF