Pfeiffer Vacuum PK D07 107, Руководство по эксплуатации

Страница: 48 / 60

12 Spare parts
12.1 Ordering spare part packages
Procedure
1. Have the vacuum pump part number to hand, along with other details from the rating plate if nec-
essary.
2. Install original spare parts only.
Spare part package Pump version Order number
Maintenance kit 1 – maintenance level 1 Standard, M version PK E01 050 CT
Radial shaft seal ring set – maintenance level 2 Standard PK E06 100 CT
Maintenance kit 2 – maintenance level 2, extended
1)
Standard PK E01 060 AT
Maintenance kit 2 – maintenance level 2, extended
2)
M version PK E01 063 AT
Overhaul kit – maintenance level 3 Standard PK E02 060 AT
M version PK E02 053 AT
Set of vanes Standard, M version PK E08 030 -T
Coupling set M version PK E06 013 -T
Tbl. 8: Spare part packages
12.2 Maintenance kit 1 – maintenance level 1
Maintenance kit 1 contains:
● Filler and drain screw seals for one operating fluid change
● Cap seal for cleaning oil chamber
● Seals and consumables for cleaning gas ballast valve
12.3 Radial shaft seal ring set – Maintenance level 2
The radial shaft seal ring set contains all parts for changing the seal ring and operating fluid:
● RSSR, coupling and felt ring
● Seals for changing the operating fluid
● Wear parts of the gas ballast valve
12.4 Maintenance kit 2 – Maintenance level 2, extended
Maintenance kit 2 contains all relevant wear parts , that have to be replaced after dismantling and
cleaning the vacuum pump:
● Set of seals
● Wear parts of the gas ballast valve
● RSSR, coupling and felt ring
● Valves and vane springs
12.5 Overhaul kit – Maintenance level 3
The overhaul kit contains all the wear parts of the vacuum pump, which must be replaced after the vac-
uum pump has been dismantled and cleaned:
● Set of seals
● Wear parts of the pumping system (including vane and springs)
● Wear parts of the vacuum safety valve
● Wear parts of the gas ballast valve
1) including radial shaft seal ring
2) without radial shaft seal ring
Spare parts
48/60