background image

11 Service solutions by Pfeiffer Vacuum

We offer first-class service

High vacuum component service life, in combination with low downtime, are clear expectations that you 
place on us. We meet your needs with efficient products and outstanding service.
We are always focused on perfecting our core competence – servicing of vacuum components. Once 
you have purchased a product from Pfeiffer Vacuum, our service is far from over. This is often exactly 
where service begins. Obviously, in proven Pfeiffer Vacuum quality.
Our professional sales and service employees are available to provide you with reliable assistance, 
worldwide. Pfeiffer Vacuum offers an entire range of services, from 

original replacement parts

 to 

service 

contracts

.

Make use of Pfeiffer Vacuum service

Whether preventive, on-site service carried out by our field service, fast replacement with mint condition 
replacement products, or repair carried out in a 

Service Center

 near you – you have various options for 

maintaining your equipment availability. You can find more detailed information and addresses on our 
homepage, in the 

Pfeiffer Vacuum Service

 section.

You  can  obtain  advice  on  the  optimal  solution  for  you,  from  your 

Pfeiffer  Vacuum  representa-

tive

.

For fast and smooth service process handling, we recommend the following:

1. Download the up-to-date form templates.

Explanations of service requests

Service requests

Contamination declaration

a) Remove and store all accessories (all external parts, such as valves, pro-

tective screens, etc.).

b) If necessary, drain operating fluid/lubricant.

c) If necessary, drain coolant.

ANFORDERUNG SERVICE

ERKLÄRUNG KONTAMINIERUNG

2. Complete the service request and contamination declaration.

3. Send the forms by email, fax, or post to your local 

Service Center

.

4. You will receive an acknowledgment from Pfeiffer Vacuum.

Submission of contaminated products

No microbiological, explosive, or radiologically contaminated products will be accepted. Where products 
are contaminated, or the contamination declaration is missing, Pfeiffer Vacuum will contact you before 
starting service work. Depending on the product and degree of pollution, 

additional decontamination 

costs

 may be incurred.

Service solutions by Pfeiffer Vacuum

48/58

Содержание MVP 040-2



























































Отзывы: