1
2
3
4
5
Fig. 5:
Connecting the electronic drive unit to the power supply, DCU and turbopump
1 TPS
4
MVP
2 DCU
5
Connecting cable,
PE 100 013 -T
3 Turbopump
Original power supply packs (e.g. TPS 110 or DCU 110) and connection cable are available for elec-
tronic drive unit voltage supply.
Connecting the electronic drive unit
1. Make sure that you have the correct supply voltage.
2. Make sure that the “S1” power supply pack master switch is off prior to connection.
3. Plug the 15-pin connection cable plug into the "remote" connection on the electronic drive unit and
secure it.
4. Plug the connecting socket with the bayonet catch into the “DC out” connection on the power sup-
ply pack, and lock it.
5.
When using a display and control unit:
Connect the “RS-485” connector of a suitable connec-
tion cable to the display and control unit.
Installation
22/52
