background image

2 Safety

2.1 General safety information

The following 4 risk levels and 1 information level are taken into account in this document.

 DANGER

Immediately pending danger

Indicates an immediately pending danger that will result in death or serious injury if not observed.

► Instructions to avoid the danger situation

 WARNING

Potential pending danger

Indicates a pending danger that could result in death or serious injury if not observed.

► Instructions to avoid the danger situation

 CAUTION

Potential pending danger

Indicates a pending danger that could result in minor injuries if not observed.

► Instructions to avoid the danger situation

NOTICE

Danger of damage to property

Is used to highlight actions that are not associated with personal injury.

► Instructions to avoid damage to property

Notes, tips or examples indicate important information about the product or about this docu-
ment.

2.2 Safety instructions

All safety instructions in this document are based on the results of the risk assessment carried out in 
accordance with Machinery Directive 2006/42/EC Annex I and EN ISO 12100 Section 5. Where applica-
ble, all life cycle phases of the product were taken into account.

Risks during transport

 WARNING

Risk of serious injury from swinging, toppling or falling objects

During transport, there is a risk of crushing and impact on swinging, toppling or falling objects. There 
is a risk of injuries to limbs, up to and including bone fractures and head injuries.

► Secure the danger zone if necessary.
► Pay attention to the center of gravity of the load during transport.
► Ensure even movements and moderate speeds.
► Observe safe handling of the transport devices.
► Avoid sloping attachment aids.
► Never stack products.
► Wear protective equipment, e.g. safety shoes.

Safety

12/68

Содержание HILOBE 11003





































































Отзывы: