Product description
7
3
Product description
3.1
Product identification
This product has been tested to the requirements of CAN/CSA-C22.2 No. 61010-1, sec-
ond edition, including Amendment 1, or a later version of the same standard incorporat-
ing the same level of testing requirements.
For information about other certifications, if applicable, please see the signet on the prod-
uct or:
●
www.tuvdotcom.com
●
TUVdotCOM-ID 0000021320
Product characteris-
tics
The electronic drive unit TC 110 is an integrated component of the turbopump. It's pur-
pose is to drive, monitor and control the entire pump.
To correctly identify the product when communicating with Pfeiffer Vacuum, always have
the information from the rating plate available.
Fig. 1:
Example for a rating plate
3.2
Range of application
Pfeiffer Vacuum electronic drive units TC 110 must be installed and operated in the fol-
lowing ambient conditions.
Characteristics
TC 110
Connection voltage TC
24 V DC ± 5 %
Connection panel
Standard (X3)
Turbopump HiPace
10, 60, 80, 300
Mod.:
M.-No.:
Ser. -No.:
Oil:
S(N
2
):
n,f:
Made in Germany
HiPace 300
DN 100 ISO-K, 3P
PM P03 900
---
260 l/s
60000 1/min, 1000 Hz
Weight:
6.7 kg
D-35614 Asslar
Installation location
weather protected (indoors)
Protection category
IP 30
Protection class
III
Temperature
+5 °C to +40 °C (up to +35 °C with air cooling)
Relative humidity
max. 80 %, at T
≤
31 °C, up to max. 50% at T
≤
40 °C
Atmospheric pressure
750 hPa - 1060 hPa
Installation altitude
2000 m max.
Degree of pollution
2
Overvoltage category
II
