Pfannenberg PMF-LED-HI-SIL, Инструкция по эксплуатации/Руководство по безопасности

Страница: 27 / 32

Electrical connection 13.3.
Illustration 8 - Terminal assignment
Connection No. X1 Function
1 Operating voltage light + (24V)
2 Operating voltage light – (GND)
3 Operating monitoring circuit + (24V)
4 Operating monitoring circuit – (GND)
5 Fault indicator output S1 (NC)
6 Fault indicator output S1 (NC)
7 Fault indicator output S2 (NO)
8 Fault indicator output S2 (NO)
Table 4 - Assignment of the terminal clamps (X1)
Settings 13.4.
DIP switch
Switch No. Switch position
OFF
Switch position
ON
Sector configuration
1
Sector 1 deactivated Sector 1 active
2 Sector 2 deactivated Sector 2 active
3 Sector 3 deactivated Sector 3 active
4
Sector 4 deactivated Sector 4 active
Operation modes
5 – 6
OFF – OFF Rotating light 150 rpm
ON – OFF
Blinking mode 1.5 Hz, 50% Duty Cycle
OFF – ON
Double flash 1 Hz
ON – ON
7
Automatic switchover to night mode
with reduced LED brightness permitted
Always on day mode with maximum
permissible LED brightness
8 reserved
Table 5 - DIP switch coding
Alarm output S1 (NC)
Alarm output S2 (NO)
Operational voltage
Flash monitoring
Operational voltage
Flashing light
DIP switch
Configuration of operating mode / sector configuration
085501100 page
11 /16
30401 – 004-2