24
28
27
Op
e
ra
te
y
o
u
r
P
fa
ff
s
e
le
c
t
Stitch width dial
The stitch w idth can be adjusted w ith this
dial (27). When selecting the w idth, the
needle must not be in the material.
Basic setting:
Turn the stitch w idth knob
(27) to the symbol (maximum stitch
w idth).
Exception:
Straight stitch is sew n w ith
stitch w idth 0.
In chapter “ 2. Utility stitches and practical
sew ing” , you w ill
À
nd recommendations
in the tables for the stitch w idth selection
of individual stitches. During sew ing you
can also change the stitch w idth.
Needle position dial
In the center needle position
14 additional needle positions can be
selected by turning the needle positioning
dial (28) in increments to the left or right.
The furthest needle position to the left
can be achieved by turning the dial
(27) as far as it w ill go to the right. The
furthest needle position to the right
can be achieved by turning the dial as far
as it w ill go the left. When the position of
the needle is being changed, the needle
must not be in the material.
Note: If you have selected the right needle
position, you can now use the width dial (27)
to increase or reduce the width of the left side
of the stitch. The reverse applies also for needle
position to the left.
Содержание select line 610A
Страница 1: ...TM TM O w n e r s m a n u a l Simply select sew ...
Страница 42: ......
