Pfaff creative icon Скачать руководство пользователя страница 56

Страница: 56 / 211

Main Functions

The Main Functions; Save, Home and Mode Switch are
located just below the Multi-Touch Screen and are
always accessible.

Save

Touch to save your stitch, design or sequence at anytime.

Home

Touch to return to the Start Page.

Mode Switch

Touch to switch between Sewing Mode and Embroidery
Edit. You can also start a new sewing or embroidery
session.

Common Functions

The following functions on the screen are used
frequently.

Confirms changes and pop-up messages and returns to
previous window.

Cancel

Cancels changes and pop-up messages and returns to
previous window.

Touch & Hold

Some icons have additional functions, marked with an
arrow at the lower right corner. To access those
functions, touch & hold on the icon for a few seconds.

Содержание creative icon



















































































































































































































Результаты поиска

Содержание creative icon

Отзывы:

Pfaff creative icon, Руководство пользователя, Страница: 56 / 211

Результаты поиска

Содержание creative icon

Отзывы: