PEUGEOT Speedfight3 LC, Руководство по ремонту

Страница: 53 / 60

FUEL SYSTEM
51
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
Removal of the engine speed adjuster screw
and mixture control screw.
- Turn clockwise the engine speed adjuster
screw (17) and mixture control screw (18)
while counting the number of turns until they
are screwed home.
- When re-fitting, this operation allows you to
put them back to their initial adjutment
position.
Do not turn the screws home forcefully.
- Remove the idle screw and the mixture
control screw with their spring.
- Clean the carburettor body and its
components with a cleanser P/N 755700 (Or
use an ultrasonic cleaning tank)
- Blow into every jet and duct of the
carburettor body with compressed air.
Do not use any metal tool which can
damage the ducts of these items.
Reassembly
- Fit the jet spray nozzle (16).
- Fit the main jet (15).
- Fit the idle adjuster screw (14).
- Place the needle valve in the grooves of the
float (2).
- Fit the pin into the float.
- Install the float on the carburettor body while
fitting the needle valve into its recess.
18
17
N
15
14
16
2