PEUGEOT 407 2008, Руководство пользователя

Страница: 143 / 204

10 10
PRACTICAL INFORMATION
125
The electrical system of your
vehicle is designed to ope-
rate with standard or optional
equipment.
Before installing other electrical equip-
ment or accessories on your vehicle,
contact a PEUGEOT dealer.
PEUGEOT will not accept responsi-
bility for the cost incurred in repairing
your vehicle or for rectifying the mal-
functions resulting from the installation
of accessories not supplied and not
recommended by PEUGEOT and not
installed in accordance with its instruc-
tions, in particular where the equip-
ment in question consumes more than
10 milliamperes.
The maxi-fuses provide additional
protection for the electrical systems.
All work must be carried out by a
PEUGEOT dealer.
CHANGING A WINDSCREEN
WIPER BLADE ECONOMY MODE FUNCTION
After the engine has stopped, certain
functions (audio equipment, wind-
screen wiper, electric windows, sun-
roof, electric seats, telephone, video,
etc) are only supplied with power for
approximately thirty minutes, to prevent
complete discharging of the battery.
Once the thirty minutes are over, a
message appears on the multi-func-
tion display and the active functions
are put on standby.
These functions are automatically re-
activated when the vehicle is started.
A fl at battery prevents the en-
gine from starting.
As winter approaches, have
your battery checked by a
PEUGEOT dealer.
If the telephone is being used
when economy mode starts,
it will still be possible to fi nish
the call.
Placing the wiper blades in the
maintenance position

Less than one minute after switching
off the ignition, press the windscreen
wiper stalk down once to position the
blades at the top of the windscreen
(maintenance position).
Replacing a blade

Lift the arm, then unclip the blade
and remove it.

Fit the new blade and fold down
the arm.
To reposition the blades, switch on the
ignition and operate the windscreen
wiper stalk.