10
10
PRACTICAL INFORMATION
119
Integrated direction indicator side
repeaters
CHANGING A REAR BULB
(SALOON)
Third brake light:
Five W 5 W bulbs.
Remove the plastic cover carefully
by unclipping it at the centre and
on either side, perpendicular to its
direction of engagement.
Press on the two tabs located at
the rear, near the rear screen.
Pull the red transparent cover out-
wards while maintaining the pres-
sure on the tabs.
Change the faulty bulb.
When refi tting, ensure that the
tabs of the red transparent cover
are engaged correctly and that the
upper trim has been put back in
place correctly.
Screw on the light fi xing nuts in-
side the boot using the towing eye,
if necessary. When refi tting, en-
sure that the light is positioned and
fi xed correctly.
Reconnect the connector.
Number plate lights
:
W 5 W.
Remove the transparent cover us-
ing a screwdriver blade.
Change the faulty bulb.
Push the repeater forwards or
backwards and release it.
Unclip the repeater and change it.
Repeaters can be obtained from
PEUGEOT dealers.
Amber coloured bulbs (direction indi-
cators and side repeaters), must be
replaced with bulbs of identical speci-
fi cation and colour.
1.
Direction indicators
:
PY 21 W (amber).
2.
Reversing lights
:
P21 W.
3.
Fog lamps/side lights
:
P21/4 W.
4.
Side lights
:
P21/4 W.
5.
Brake lights/side lights
:
P21/4 W.
Disconnect the connector.
Unscrew the light fi xing nuts in-
side the boot using the towing eye
(stored inside the spare wheel), if
necessary.
Remove the seal.
Unclip the bulb holder moving
aside the 5 tabs.
Unscrew the bulb and change it.
Lock the bulb holder in place.
Reposition the seal.
Содержание 407 2008
Страница 16: ...1 INSTRUMENTS and CONTROLS 19...
Страница 18: ...1 INSTRUMENTS and CONTROLS 21...
Страница 40: ...3 COMFORT 41...
Страница 160: ...11 11 TECHNICAL DATA 142 DIMENSIONS IN MM 407 saloon 407 SW...