8
DRIVING
101
CRUISE CONTROL/SPEED
LIMITER
Selecting the function
Place switch
1
in the
CRUISE
po-
sition. The cruise control is not yet
active and no speed has been me-
morised. The display indicates:
Switching the function off
Place switch
1
in position
0
or
LIMIT
to switch the system off.
Note:
It is possible to acceler-
ate and drive momentarily at a
speed greater than the memo-
rised speed. The value mem-
orised fl ashes. When the accelerator
pedal is released, the vehicle will re-
turn to the memorised speed.
Cancelling the memorised speed
If you wish to cancel the memorised
speed:
Press button
4
or the brake or
clutch pedal. The display indicates
(e.g. at 70 mph (110 km/h)):
Activation/memorising a speed
As soon as you reach the chosen speed,
press button
2
or
3
. This memorises the
speed, which will be maintained auto-
matically. The display indicates (e.g. at
70 mph (110 km/h)):
On a steep descent, the cruise
control, which does not act on
the brakes, is not able to pre-
vent the vehicle from exceed-
ing the programmed speed.
In no circumstances does the
cruise control replace the requirement
to respect speed limits, nor does it
replace the need for vigilance and re-
sponsibility on the part of the driver.
We recommend that your feet remain
near the pedals.
Cruise control function
This enables the vehicle to maintain a
steady speed programmed by the driver
In order for it to be memorised, the
vehicle speed must be greater than
25 mph (40 km/h) with at least fourth
gear engaged (second gear for the
automatic gearbox),
with the engine
running
.
Содержание 407 2008
Страница 16: ...1 INSTRUMENTS and CONTROLS 19...
Страница 18: ...1 INSTRUMENTS and CONTROLS 21...
Страница 40: ...3 COMFORT 41...
Страница 160: ...11 11 TECHNICAL DATA 142 DIMENSIONS IN MM 407 saloon 407 SW...