PEUGEOT 208 2017, Руководство пользователя

Страница: 162 / 304

160
In the event of a breakdown
F
Start the compressor by turning the switch
to the " l " position until the pressure of the
tyre reaches 2.0 bars. The sealant product
is injected under pressure into the tyre; do
not disconnect the hose of the valve during
this operation (risk of blowback).
If after around 5 to 7 minutes the pressure
of 2 bars is not attained, this indicates
that the tyre is not repairable; contact a
PEUGEOT dealer or a qualified workshop
for assistance.
F
Place the switch in the " O " position.
F
Remove the kit.
F
Drive immediately for approximately three
miles (five kilometres), at reduced speed
(between 12 and 37 mph (20 and 60 km/h)),
to plug the puncture.
F
Stop to check the repair and the tyre
pressure using the kit.
Take care, the sealant product is harmful
if swallowed and causes irritation to the
eyes.
Keep this product out of the reach of
children.
The use-by date is marked on the bottle.
After use, do not discard the bottle by the
roadside, take it to a PEUGEOT dealer or
an authorised waste disposal site.
Do not forget to obtain a new bottle of
sealant, available from a PEUGEOT
dealer or a qualified workshop.
Checking / adjusting tyre
pressures
You can also use the compressor,
without injecting sealant, to check and, if
necessary, adjust the tyre pressures
F
Remove the valve cap from the tyre and
place it in a clean area.
F
Uncoil the pipe stowed under the
compressor.
F
Screw the pipe onto the valve and tighten
firmly.