PEUGEOT 2011 207, Руководство пользователя

Страница: 138 / 250

9
i
PRACTICAL INFORMATION
136
) Switch on the compressor by moving
the switch B to position "I" until the
tyre pressure reaches 2.0 bars.
The sealant is injected into the tyre
under pressure; do not disconnect
the pipe from the valve during this
operation (risk of splashing).
) Remove the kit and screw the cap
back on the white pipe.
Take care to avoid staining your ve-
hicle with traces of fl uid. Keep the kit
to hand.
) Drive immediately for approximately
three miles ( fi ve kilometres), at reduced
speed (between 15 and 35 mph [20
and 60 km/h]), to plug the puncture.
) Stop to check the repair and the tyre
pressure using the kit.
If after around 5 to 7 minutes the
pressure is not attained, this indicates
that the tyre is not repairable; contact
a PEUGEOT dealer or a quali fi ed
workshop for assistance.