Figure 1
B. Inserting the Batteries in the Transmitter
•
The Sport Dog Transmitter requires two (2) 9 volt alkaline batteries.
To insert the batteries, follow the instructions listed below:
•
Open the battery door by loosening the two screws in the lower back
panel of the transmitter handle. It is not necessary to remove the two
screws located at the upper back panel of the transmitter.
•
Place one of the two 9 volt batteries on the shorter battery connector.
•
After the battery has been placed on the shorter battery connector, place
it in transmitter handle with the front end of the battery covering the User
Identification Code label as shown in Figure 2.
•
Place the second battery on the longer battery connector and place it in
the lower portion of the transmitter handle with its wires on top of the
first battery. Refer to Figure 3.
•
Replace the battery door and secure it with two screws. When replacing the
battery door, make sure the wires from the battery connectors do not keep
the battery door from being properly secured.
Figure 2 Figure 3
6
400-158-11/B
5/4/00, 10!31 AM
6-7
