Petsafe PRF-3004XW-20, Руководство по эксплуатации

Страница: 6 / 172

6 petsafe.com
EN
FR
NL
ES
IT
DE
DA
How the System Works
A radio signal travels through a buried wire, marking the boundaries you wish to set for your dog. Your dog wears a Receiver
Collar that detects the signal at the boundary. As your dog approaches the boundary, the receiver issues a warning tone
with vibration. If he proceeds further, he receives a safe but startling Static Correction. While harmless, the Correction
will persuade him to stay in the Containment Area you’ve established. The Stubborn Dog Receiver Collar offers 5 levels of
correction, adjustable to your dog’s temperament. This PetSafe
®
Stubborn Dog In-Ground Fence
™
system has been proven
safe, comfortable, and effective for pets over 3.6 kg (8 lbs).
Key Definitions
Fence Transmitter: Transmits the radio signal through the Boundary Wire.
Pet Area: Area within the Warning Zone where your pet can roam freely.
Warning Zone:
Outer edge of the Pet Area where your pet’s Receiver Collar begins to beep, warning him not to go into the
Static Correction Zone.
Static Correction Zone:
Zone beyond the Warning Zone where your pet’s Receiver Collar will emit a Static Correction,
signaling him to return to the Pet Area.
Boundary Width:
Combination of the Warning Zone and the Static Correction Zone.
Receiver Collar: Receives the radio signal from the Boundary Wire.
Correction Level Button: Adjusts the level of Static Correction your pet receives in the Static Correction Zone.
Receiver Indicator Light: Indicates the level of correction at which the Receiver Collar is set. This light also serves as a
low battery indicator.
Contact Points: Delivers the safe Static Correction when your pet moves into the Static Correction Zone.
Power Jack:
Where the Power Adapter plugs into the Fence Transmitter. The Fence Transmitter is powered by a
standard outlet.
Boundary Control Switch:
Switch located on the Fence Transmitter to adjust according to the length of Boundary Wire used.
Boundary Wire Terminals: Where the Boundary Wires connect to the Fence Transmitter in order to complete a
continuous loop.
Loop Indicator Light: Indicates that the Boundary Wire makes a complete loop, enabling the signal to be transmitted.
Boundary Width Control: Adjusts the width of the Warning and Static Correction Zones. Note: Adjusting the knob does not
change the level of Static Correction on the Receiver Collar.
Pet Area
Static Correction
Zone
Static Correction
Zone
Fence
Transmitter
Warning
Zone
Warning
Zone
Boundary
Width
}
Boundary Width
Control
Power Light
Loop Indicator Light
Boundary Wire
Terminals
Boundary
Control
Switch
Power
Jack
Fence Transmitter
Receiver Collar
Correction
Level
Button
Washers
Contact Points