Petsafe PIF00-15001, Руководство по эксплуатации и обучению

Страница: 8 / 28

1-800-732-2677
8
How the System Works
The PetSafe
®
Free to Roam Wireless Fence
™
system has been proven safe, comfortable, and effective
for pets over 5 pounds. The system works by transmitting a radio signal up to 90 feet in all directions.
You temporarily define the Pet Area with Boundary Flags for a visual aid in training your pet. Your pet
wears a Receiver Collar with Contact Points that touch his neck, and, once trained, is allowed to roam
freely in the Pet Area. When your pet reaches the Boundary Zone, the Receiver Collar gives a warning
tone before delivering a safe Static Correction through the Contact Points to get his attention until
he returns to the Pet Area.
Key Definitions
Transmitter: Transmits the radio signal and is the center
of the Pet Area. The Transmitter needs to be located indoors.
Pet Area: Distance from the Transmitter where
your pet can roam freely.
Boundary Zone: 2 to 3 foot wide area outside the
Pet Area where your pet’s Receiver Collar will begin
to tone and then begin to deliver a Static Correction.
The correction will start in the Boundary Zone and
continue anywhere beyond the Pet Area.
Note: The Receiver Collar is equipped with a safety
time-out feature that will stop correcting after
15 seconds if your pet remains outside the Pet Area.
Receiver Collar: Receives the radio signal from
the Transmitter.
Mode Button: Turns Receiver ON/OFF and adjusts
the level of Static Correction your pet receives outside the Pet Area.
Receiver Indicator Light: Indicates the level of correction
at which the Receiver Collar is set. This light also serves
as a low battery indicator.
Contact Points: Deliver the safe Static Correction when your pet moves into the Boundary Zone.
Power Jack: Where the Power Adapter plugs into the Transmitter.
The Transmitter is powered by a standard 120-volt outlet.
Boundary Switch: Adjust according to the size of the Pet Area desired.
Low Range of 5-45 ft. is “–”; High Range of 5-90 ft. is “+”.
Note: Adjusting the switch does not change the level of Static Correction on the Receiver Collar.
Power Light: Indicates when the Transmitter is on.
Boundary Control Dial: Adjusts the distance from the Transmitter to the Boundary Zone.
Note: Adjusting the dial does not change the level of Static Correction on the Receiver Collar.
Transmitter
Power
Jack
Boundary
Control Dial
Boundary
Switch
+ = High
- = Low
On/Off
Switch
l = On
O= Off
Receiver Collar
Receiver
Indicator
Light
Contact
Point
Mode
Button
Transmitter
Note: In many
neighborhoods,
nearby property lines
may limit how large
the Pet Area can be.
PET AREA
Maximum
90 ft. range
(45 average steps)