Petsafe Peek-a-Bird, Руководство по эксплуатации продукта

Страница: 2 / 28

2
petsafe.com
Hereinafter Radio Systems Corporation, Radio Systems PetSafe Europe Ltd., Radio Systems Australia Pty Ltd. and any other
affiliate or Brand of Radio Systems Corporation may be referred to collectively as “We” or “Us”.
IMPORTANT SAFETY INFORMATION
Explanation of attention words and symbols used in this guide
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
CAUTION
, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
CAUTION
, used without the safety alert symbol, indicates a hazardous situation which, if not avoided,
could result in harm to your pet.
NOTICE , is used to address safe use practices not related to personal injury.
Keep away from children.
• Not intended as a toy for children.
• Do not allow small children to use this product to play with your pet without adult supervision.
• Do not use this product until you have read the entire Product Manual.
• Do not use this product on an elevated surface such as a table or counter. Use on the floor only.
• This product should only be used in accordance with the instructions in the product manual.
• Adult supervision is required around pets.
• Do not use Play All Day feature until you observe how your cat interacts with the toy. Only use Play
All Day feature if you deem your cat uses product as intended.
• Inspect this product periodically for damage and discard product immediately if it appears worn
or broken.
• Do not mix old and new batteries.
• Do not mix standard, alkaline or rechargeable batteries.
• Do not use rechargeable batteries.
• Do not try to recharge non-rechargeable batteries.
• Exhausted batteries should be removed immediately. Do not dispose of batteries with household
waste.
• The supply terminals are not to be short-circuited.
These instructions must be retained and passed on with ownership.
Toy assembly
No assembly is required. To use, simply install batteries and follow the operating instructions. Do not place the toy on any
surface other than a flat, level floor.
Battery installation
1. Locate battery door on bottom of the toy (
A
). Unscrew and remove
the battery door.
2. Insert three AA batteries (not Included) into the battery compartment
( B ). Make sure to insert the batteries with the correct polarity. Polarity
is marked in the compartment.
3. Replace the battery door and ensure it is closed properly. Tighten the
screw to secure the battery door.
A B
EN
FR
NL
ES
IT
DE