Petsafe PDT19-16397, Руководство по эксплуатации продукта

Страница: 6 / 72

6 petsafe.com
EN
FR
NL
ES
IT
DE
Collar Function and Response Table
Function LED Light Response Beep Response
Spray collar is turned on Green LED illuminates Beeps low to high
Spray collar is turned off Red LED illuminates Beeps high to low
Collar is on Green LED light flashes once every 5 seconds None
Spray activation None None
Low battery condition Red LED light flashes 3 times every 5 seconds None
Low spray warning Yellow LED flashes once every 5 seconds
and the battery is good
Yellow LED flashes 3 times every 5 seconds
and the battery is low
None
No refill cartridge Red and green LEDs alternate flashing for 5 seconds,
and the collar will turn off
4 beeps
Spray collar is on/Cartridge is
empty (will not spray) Yellow LED flashes once every 5 seconds
and the battery is good
Yellow LED flashes 3 times every 5 seconds
and the battery is low
None
Turning collar on/Cartridge is
empty (will not spray) Yellow LED flashes 2 times 2 beeps
Charge the Remote
1. Lift the rubber cover protecting the remote charging jack on the
back of the remote.
2. Connect the USB charger to the charging jack (
2A
).
3. Plug the USB charger into a USB port or if you have an adaptor,
plug it into a standard wall outlet.
4. The battery indicator will display when fully charged.
5. When the remote is fully charged, replace the rubber cover.
NOTE:
The remote is always on, and the display will appear when any
button is pressed (
2B
).
Tone Symbol:
Delivers a tone with non-adjustable
volume to the collar.
Vibration Symbol:
Sends 1 non-adjustable level of
vibration stimulation to the collar.
Spray Symbol:
Delivers 1 level of spray stimulation.
Dog 1/2:
Indicates which training collar is active.
Battery Indicator:
Indicates the amount of battery
remaining in the remote.
2A
2B
Tone
Vibration/
Spray
Dog 1
Dog 2
Level Adjuster
0=Vibration
5=Spray