6
Customer Care Center 1-800-732-2677
www.petsafe.net 7
Key Definitions
Handheld Remote: Transmits the
signal to the Receiver Collar.
Tone Button (Green): Sends
an audible tone to the collar. No
Vibration is delivered.
Vibration Button (Blue): Delivers
Vibration through the Vibration
Points on the Receiver Collar at the
level shown on the Digital Display.
A safety time-out will be triggered if
the button is held for more than 10
consecutive seconds. The safety
time-out will end when the button
is released.
+2 Boost Button (Red): Adds a
boost 2 levels above the currently selected Vibration Level. Can not exceed the 8 High Level.
Vibration Down Button (-): Decreases Vibration Level by 1.
Vibration Up Button (+): Increases Vibration Level by 1.
Digital Display: Indicates Vibration Level, pairing mode and battery status. See “Prepare the Handheld
Remote” section for more details.
LED (Handheld Remote): 3 colors indicate which function the Handheld Remote is currently performing.
Green LED: Indicates Tone is being transmitted.
Red LED: Indicates Vibration is being transmitted. Also indicates low battery.
Orange LED: Indicates pairing command is being transmitted.
Receiver Collar: Delivers Vibration or Tone on a signal from
the Handheld Remote. It is water-resistant.
On/Off Button: Momentarily pressing and holding this button
turns the Receiver Collar on and off.
Vibration Points: Deliver Vibration to your pet from the
Handheld Remote.
LED (Receiver Collar): Indicates that a button is pressed
and also serves as a low-battery indicator.
Red LED: Indicates low battery and when Vibration Button is pressed.
Green LED: Indicates good battery and when Tone Button is pressed. Also indicates when Pairing Mode
is complete.
LED
Tone Button
(green)
Digital Display
Vibration
Button (blue)
Vibration
Up
Button
+2 Boost
Button
Vibration
Down
Button
Belt Clip
Battery
Cover
Wrist
Strap
Loop
LED
Battery
Cover
Vibration
Points
On/Off
Button
