18
Customer Care Center 1-800-732-2677
The “Recall” Command
1. Put a separate, non-metallic collar on your pet’s neck
ABOVE the Receiver Collar, and attach a 10-foot leash.
Note: Be sure the extra collar does not put pressure on the
Vibration Points.
2. Hold your leash in one hand and the Handheld Remote in
the other.
3. Wait for your pet to walk away from you. Using the
Recognition Level for your pet, press and hold the Vibration
Button on your Handheld Remote.
4. Immediately give the command “Come” while continuing to
hold the Vibration Button.
5. Using the leash, gently guide your pet toward you until he
begins to come in your direction.
6. Immediately release the Vibration Button as soon as your pet
steps towards you, and praise him enthusiastically.
7. Quickly move backwards as your pet begins to come back to
you, praising him the entire time.
8. Praise your pet when he returns to you.
9. Repeat Steps 3 through 8.
10. Once your pet responds readily to the “Come” command
several times, back away from him without giving a
command. When your pet turns toward you, give the
command “Come” (WITHOUT VIBRATION) and praise him
while you continue to back up. Praise your pet when he
returns to you.
11. Use your leash to prevent your pet from running past you. If
your pet manages to run past you, repeat Steps 3 through 8.
The “Stay” Command
1. Put a separate, non-metallic collar on your pet’s neck ABOVE the Receiver Collar, and attach a 10-foot
leash. Note: Be sure the extra collar does not put pressure on the Vibration Points.
2. Visibly identify a designated area where you want your pet to sit by placing his bed or a large piece of cloth on
the ground.
3. After identifying a place, put your pet in that area. Hold your leash in one hand and the Handheld Remote in
the other.
