DE
NL
IT
FR
ES
EN
www.petsafe.net 7
6 www.petsafe.net
Timer Mode example:
It might be helpful to think of Timer Mode in the form of a 24 hour or clock timeline If you want your pet(s) to have full
access during the daytime (for example, from 7 am in the morning until the late evening) but want your pet(s) to be indoors at night (for example,
starting at 7 pm), you would want to set the access mode to
In/Out
at 7 am and then the access mode to
In-Only
at 7 pm
To Remove Timer Mode Access Time:
1 From
Main Menu
select
Setup > Pet Settings > Master Access > Mode
2 Press right arrow key to scroll to Timer option to select
3 Once Timer has been selected, Access Time will appear at bottom of
Master Access Menu list Use down arrow key to highlight
Access
Time
then right arrow key to select
4 Use up and down arrow keys to highlight which Access Time slot you
wish to remove Press right arrow key to select
5 Use down arrow key to highlight
Remove
and right arrow key to
select The time slot on the Access Time Menu should now be removed
Remember you must have a minimum of two programmed
Access Times for Timer Mode to work
Note:
Timer Mode can be disabled by setting a different Master Access Mode, while keeping the programmed Timer Mode Settings This might be
useful if you want to use Timer Mode during the week and a different Master Access Mode on the weekend
Re-latch Time (Master Access)
The Re-latch Time is the amount of time it takes the Cat Flap to re-lock after the cat’s microchip/Passport
™
Key is no longer detected Under Master
Access the same Re-latch Time is easily set for all pets The factory default Re-latch Time is set to 2 seconds but can be changed from 1 second to
60 seconds A longer Re-latch Time may be needed if you have older or slower pets
To Change Re-latch Time:
1 From
Main Menu
select
Setup > Pet Settings > Master Access
Use right arrow key to select
2 Use down arrow key to highlight
Re-latch Time
then use right arrow key to scroll through to find desired
Re-latch Time Press left arrow/back key to return to Main Menu
After using Timer Mode to program the example
listed, the Access Time menu screen would display:
example:
In-Only
In/Out
12 am
7 am
12 pm
7 pm
11 pm
