www.petsafe.net
5
Fit the Bark Control Collar
Important: The proper fi t and placement of your Bark Control Collar is
important for effective operation.
To assure a proper fi t, please follow these steps:
1. Make sure that the Bark Control Collar is turned off.
2. Start with your dog standing comfortably.
3. Place the Bark Control Collar high on your dog’s neck close to the ears.
Center the unit underneath your dog’s neck with the spray nozzle facing
upward.
YES
NO
4. Check the tightness of the Bark Control Collar by inserting one
fi nger between the collar and the back of the dog’s neck. The fi t
should be snug but not constricting.
5. Allow your dog to wear the collar for several minutes,
then recheck the fi t. Check the fi t again as your dog
becomes more comfortable with the Bark Control
Collar.
6. Trim the collar as follows:
a. Mark the desired length of the collar with a pen.
Allow for growth if your dog is young or grows a
thick winter coat.
b. Remove the Bark Control Collar from your dog and
cut off excess.
c. Before placing the Bark Control Collar back onto
your dog, seal the edge of the cut collar by applying a
fl ame along the frayed edge.
7. The PetSafe
®
QuickFit
™
collar is designed so you can
quickly attach and remove the Bark Control Collar
from your dog while maintaining the desired fi t. Once
the fi t is determined, simply use the Snap Buckle to
remove and replace the collar.
Important: The Bark Control Collar should not be worn for more than 8 hours
out of every 24-hour period.
