10
1-800-732-2677
Tone Only
When pressing Tone Only for Dog 1 or Dog 2 the
number zero appears.
Battery
Indicator
The battery indicator provides constant
awareness of your battery’s power level. See
Battery Indicator for more detailed information.
Note: Factory preset is for Dog 1 mode, you will not see the Dog 2 symbol unless the
unit is programmed for Dog 2 (see Two Dog System on page 14).
Battery Indicator
Battery is at
2
⁄
3
to Full capacity.
Transmitter is fully functional.
Battery is at
1
⁄
3
capacity.
Transmitter is still fully
functional.
Battery is at
1
⁄
6
capacity. Transmitter
will operate the Receiver, but should
be recharged as soon as possible.
Battery is almost dead.
Transmitter is unable to
operate the Receiver.
When the Battery Indicator shows the low battery symbol (
1
⁄
6
capacity), recharge your
Transmitter soon. When the battery outline is displayed, the Transmitter’s battery is unable to
power transmissions to the Receiver. Transmitter must be recharged to regain operation.
Remote Transmitter Functions for Dog 1
Transmitter Function
Button Color
Digital Display Response
Upper Left Button
Green
Tone Only
Lower Left Button
Yellow
Stimulation
Upper Right Button
Grey
Stimulation level Up
Lower Right Button
Grey
Stimulation level Down
Boost Button
Red
+2 above selected Stimulation Level
See Two Dog System on page 14 for remote transmitter functions in Dog 2 mode.
Remote Transmitter Belt Clip
To remove:
1. Press and hold the Release Lever on the Belt Clip, pulling away from the Transmitter.
2. Slide the Belt Clip out of the insert.
To replace:
1. Slide the Belt Clip into the insert until it clicks, locking into place.
