Assembly instructions
Thank you for choosing the Petromax Campfire Bracket for Wrought Iron Pans. With the Campfire
Bracket your fireplace becomes your individual outdoor kitchen in just a few steps.
To assemble the Campfire Bracket, proceed as follows:
1
Choose a suitable location for your Campfire Bracket. Never place the bracket directly in the
fireplace. It should be placed directly next to the fireplace.
2
Straighten the steel rod and sink it straight into the ground using a rubber mallet until the
bracket is secure in the ground. Alternatively, you can place a piece of wood on top of the
bracket and hit it.
3
Place your Petromax Wrought-Iron Pan in one of the three notches.
Scope of delivery
1 x Campfire Bracket for Wrought Iron Pans
Important instructions
• Please always be careful when fixing the Campfire Bracket in the ground so that you do not
scratch or deform the bracket.
• Use only moderate pressure and force so that you can work in a controlled manner.
• Always check the ground conditions before driving the Campfire Bracket into the ground. Make
sure that the ground is firm enough to allow the Campfire Bracket to be set up with sufficient
stability. If the ground is very hard or you sink the Campfire Bracket into the ground incorrectly,
the Campfire Bracket may deform when hammered into the ground.
• The Campfire Bracket is optimally positioned when the Wrought-Iron Pan is centred over the fire.
• If you proceed as described in these instructions and take care with the placing of the Campfire
Bracket, the product will retain its shape.
• Make sure that the Campfire Bracket does not come into contact with food.
