Petersen Products 128 Series
Water Inflation Controller
24
Operating the Water Flow Totalizer:
•
Press the
Display
button
once
to display the total
volume of water ever used by this pump.
•
Press the
Display
button
again
to display the Batch
(ammount of water used).
•
Press the
Display
button
again
to show Flow Rate.
•
To reset the Batch to Zero to track the quantity of water:
display the
Batch
then press and hold the
Display
button.
•
To change units from gallons to liters: hold the
Calibrate
button and press the
Display
button.
Assembling the Water Hoses and Pressure Monitoring Lines
Attach the Water Hose and Pressure Monitor Hose to the Inflation Ram Pulley Assembly.
Attach the other end of the Pressure Monitor Hose to the Low Pressure Alarm.
Attach Pressure Monitor Valve Assembly to the Low Pressure Alarm.
Pump Inlet
Calibrate
Display
Flow Totalizer
Water Hose
Pressure Monitor Hose
Inflation Ram