VersiStart i II
3
2.
Declaration of conformity
In industrial linguistic usage the drive controllers of the type series VersiStart i II are called "devices", however,
in the sense of the "law on the safety of equipment", the "EMC-law" or the "EC-machinery directive" they are not
devices or machines ready for use or connection but they are components. It is only possible to define their final
function, when these components are integrated into the design and construction of the user.
To be able to use the devices to their intended purpose, it requires power supply networks according to
DIN EN 50160 (IEC 60038).
The user takes the responsibility that the user's design and construction comply with the applicable legal
provisions.
The commissioning is strictly forbidden as long as the conformity of the final system with the guidelines
2006/42/EC (Machinery directive) and 2014/35/EU (Low voltage directive) is not proved.
The devices of the VersiStart i II series are electrical equipment that is used in industrial electrical power
installations. They are designed for application in machines, in order to reduce the starting torque and starting
current peaks as well as the tripping torque of drives with three-phase induction motors. With due regard to the
installation guidelines they meet the following requirements:
Emitted interference:
Continuous duty
EN 61000-6-3:2005
Acceleration, decel.
EN 60947-4-2
Immunity to interference:
EN 61000-6-2:2005
VersiStart i II has been designed to meet the standards specified in EN 60947-4-2: Low voltage switchgear –
Part 4-2 Contactors and motor-starters – AC Semiconductor motor controllers and starters, for low voltage
safety, operation and EMC.
This product has been designed as Class A equipment. Use of this product in domestic environments may
cause radio interference, in which case the user may be required to employ additional mitigation methods.
Dr. Thomas Stiller
Managing director
