EASY STEP 1I1 EXTRA WIDE • PG9730XL
3
ASSEMBLY INSTRUCTIONS
Step 1
With rubber grippers on the bottom, place right panel,
part (B) on floor with
PET GEAR
Logo facing the floor and
insert top stair, part (E).
Keep the STRAIGHT SIDE toward the back and rug facing
the top. Make sure there are no gaps between parts after
inserted. (If inserting part is difficult put a little dish soap
on doweled end before inserting.)
Step 2
Insert riser, part (C).
Make sure there are no gaps between parts after inserting.
C
B
E
Straight Side
Step 3
Insert middle stair, part (F). Note the CURVED SIDE
direction. Make sure there are no gaps between parts
after inserting.
Step 4
Insert riser, part (C). Make sure there are no gaps
between parts after inserting.
C
F
Curved
Side
Make sure
rubber
grippers
are on the
bottom.
