1
(s. 4-7 – wersja polska)
(S. 8-10 – Deutsche Version)
Perun
AB
User and installation manual
1.
General information
Perun AB
is an electronic circuit that protects mechanical
switches in your replica. When installed, high currents used to
accelerate the motor are not directed through contacts, but
through specialized MOSFET transistor. It not only increases
reliability but also has a positive effect on the rate of fire as
MOSFETs have much lower resistivity than contacts.
Besides that,
Perun AB
allows you to enable or disable active
brake mode (AB), which stops the motor as soon as gearbox
cycle ends. This helps by reducing spring wear.
For Li-Po battery users
Perun AB
offers Li-Po protection mode
that will alarm you if battery voltage falls to dangerously low
levels.
Warranty – 1 year
Allowed battery types:
Li-Po, 2 to 4 cells (7.4V to 14.8V)
NiMH/NiCd, 8 to 10 cells (9.6 to 12V)
Li-Fe, 3 to 4 cells (9.9 V to 13.2V)
ATTENTION!
The device must never be run without a fuse.
ATTENTION!
Do not leave your replica with the battery
plugged in for a longer period of time (more than a few days),
because of the risk of complete battery discharge (which will
permanently damage the battery).
