Permobil ROHO AGILITY CARBON, Руководство по эксплуатации, Страница: 7 / 20

ROHO AGILITY CARBON Contour Back Support Operation Manual
5
Hardware Selection Part One: Discs / Screws
Warnings:
-
If the wrong hardware is used, the product will NOT fit correctly on the wheelchair. Follow these instructions to select the correct hardware.
Consult with a clinician or the equipment provider for assistance.
-
If the product was provided already installed on your wheelchair, it is not necessary to select new hardware. However, if you are going
to remove the product and install it on a different wheelchair, make sure to follow all Hardware Selection and Product Installation and
Adjustment instructions before using the product.
Instructions: Select the correct discs and screws. Then, continue with "Hardware Selection Part Two: Outer Cane Clamps".
STEP ONE: Find the Back Shell
Width.
Refer to the label on the back shell and
the tables below.
STEP TWO: Find the correct Width
Range:
Measure the distance between the
outsides of the wheelchair canes, as
shown. Refer to the tables below.
STEP THREE: Select Option 1, 2, or 3 (based on the Back
Shell Width and the Width Range).
Note: Each Option includes two (2) discs and one (1) screw for
each side of the back shell (total of 4 discs and 2 screws). Set
aside any remaining parts.
L R
Back Shell Width Width Range Option 1
cm in.
L
= Left Side
R
= Right Side
14 34.9 - 35.9 133/4 - 141/8
A A
A A
20mm
A A
A A
20mm
15 37.5 - 38.4 143/4 - 151/8
16 40 - 41 153/4 - 161/8
17 42.5 - 43.5 163/4 - 171/8
18 45.1 - 46 173/4 - 181/8
Option 2
cm in.
L
= Left Side
R
= Right Side
14 35.9 - 36.8 141/8 - 141/2
25mm
A B
A B
A B
B A
25mm
15 38.4 - 39.4 151/8 - 151/2
16 41 - 41.9 161/8 - 161/2
17 43.5 - 44.5 171/8 - 171/2
18 46 - 47 181/8 - 181/2
Option 3
cm in.
L
= Left Side
R
= Right Side
14 36.8 - 37.5 141/2 - 143/4
30mm
B B
B B
B B
B B
30mm
15 39.4 - 40 151/2 - 153/4
16 41.9 - 42.5 161/2 - 163/4
17 44.5 - 45.1 171/2 - 173/4
18 47 - 47.6 181/2 - 183/4