PushTracker E2
** All figures shown are for illustrative purposes only and actual products may vary.
Use the camera on your smartphone to
scan QR codes.
Note
: When upgrading from previous models, refer to the
Permobil website for current product instruction and information.
During set-up, go to the
Permobil website for more
information and support:
1
Get the Wear OS by Google app on your smartphone
to set up your PushTracker E2:
Google, Google Play and Wear OS by Google are trademarks of Google LLC.
Apple logo is a trademark of Apple, Inc.
2
On your PushTracker E2, go to the Google Play Store
and get:
SmartDrive MX2+
PushTracker
3
Swipe and touch to get around inside the SmartDrive
MX2+ app for:
• Wireless Updates of your SmartDrive • Adjusting your SmartDrive Settings
4
Customize your watchface with shortcuts to the apps
or use Permobil’s watchface:
5
Use your SmartDrive [MX2+ Control Mode]:
• Double tap to start driving the motor by ramping up its speed.
• Single tap to coast at the current speed.
• Double tap to deactivate the driving.
• Brake on the handrims to slow down.
CUT OR TEAR HERE IF NEEDED
APPLY ADHESIVE HERE
E2MX2-QSS Rev. A
