Permobil M400 Corpus HD, Руководство по обслуживанию, Страница: 40 / 100

M400 Corpus HD
Repairs - Seat
4.1.14.2 Mounting the leg rest strap
Figure 59. Strap mounting on the leg rest
1. Pull the strap through the bracket on the back of the leg rest.
Measure to make sure that the strap extends 3.3 inches from the
bracket. Secure the strap by tightening the two screws on the
bracket.
2. Slide the lower section of the leg rest up and pull the strap through
the leg rest mechanism.
3. Place the mounting plate in the loop of the strap and then mount
this on the front of the leg rest using the two screws.
4.1.15 Leg rest slide bushings
WARNING!
Risk of injury while working on the leg rest
Do not place any weight on the leg rest while working on it.
The following tools are necessary for this task:
• Allen key 3 mm
4.1.15.1 Removing the leg rest slide bushings
1. Set the angle of the leg rest to its outermost position.
2. Switch off the main power switch on the control panel.
3. Remove one end of the leg rest strap by carefully raising the lower
section of the leg rest slightly and at the same time removing the
two screws on the front of the leg rest. Pull the mounting plate out
of the loop of the strap. See
4.1.14.1
Removing the leg rest strap, Page 39. Once the strap is
loosened the lower section of the leg rest will become loose and can
be carefully pulled downwards/forwards until the lower section of
the leg rest is completely loose.
40