Permaquip Kubota RRV, Руководство пользователя

Страница: 21 / 56

MAN-M-O-190_13 09/10/2014 Page 21 of 56
6.3. On-tracking Procedure
Ensure that no passengers are in the vehicle.
Note the maximum cant and gradient, as defined in the Technical
Specification.
Ensure that the appropriate track possession has been confirmed.
Do not use the r
amps within the ‘strike-in’ zone of an automatic level
crossing unless appropriate manual controls of the crossing are in place.
Do not use the ramps where a fixed train approach warning system is
fitted unless appropriate warning measures are in place to provide an
alternative safe system of work.
Do not use the ramps if HVI track circuits are installed unless the circuits
have been disconnected or the personnel installing the ramps are
wearing appropriate PPE.
Assess the area for the most suitable method of on-tracking and position the vehicle
accordingly. The following details the correct procedures for on-tracking:
Level Crossings

Drive the vehicle onto the rails at a suitable, (as directed by the supervisor),
level
crossing and ‘centre’ all four wheels thus ensuring that all of the
Permaquip Kubota wheels are positioned over the rails and the front wheels
are straight. Apply the handbrake.

Refer to the sect
ions ‘Lowering the Front Rail Gear’ and ‘Lowering the Rear
Rail Gear’.
Passage of Traffic
Always ensure that the ramps are moved to a position of safety after use
as they do not allow the passage of other traffic.