Model: PGSS7
Speaker Floor Stand
Instruction Manual
V2.0
Thank you for choosing this Perlegear product! At Perlegear we strive to
provide you with the best quality products and services in the industry.
Should you have any issues, please don't hesitate to contact us at
[email protected](US/CA)
IMPORTANT SAFETY INFORMATION
Tools Needed (Not lncluded)
• Carefully open the carton, remove contents and lay out on cardboard or other
protective surface to avoid damage.
• Please carefully read all instructions before attempting installation. If you do
not understand the instructions or have any concerns or questions, please
contact our customer service at [email protected].
• Before starting assembly, verify all parts are included and undamaged. Do not
use damaged or defective parts. lf you require replacement parts, please
contact our customer service at [email protected].
• Please note: Not all hardware included in this package will be used.
• This product may contain moving parts. Use with caution.
• Do not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We are not liable for damage or injury
caused by improper mounting, incorrect assembly or inappropriate use.
Philips Screwdriver
Supplied Parts
STEP 1 Attach the nails or rubber pads to the base feet
Supplied Hardware
Base
x2
01
Post Extension
x2
02
Post Assembly
x2
03
90 Degree Plate
x2
04
Square Plate
x2
05
Narrow Plate
x2
06
x6
C
x2
D
x2
E
x2
F
x6
A
A
B
x6
B
Bolt
1/4″ x13.5mm
x4
P
Washer
#6 x #14
Nail
Nut
Pad
Sponge
Plastic Nut
x4
x4
I
J
x4
K
x2
G
x4
H
Washer
M4/M5
Bolt
M5x8mm
Bolt
M5X12mm
Bolt
1/4″x12mm
Bolt
M4X12mm
OPT
A
OPT
B
B
For marble or wooden floor, rotate
and insert the rubber pads into the
holes of the base.
For carpets floor, screw the nails
into the holes of the base.
x2
x2
N
O
x4
L
x2
M
Washer
#6
Bolt
M6x12mm
Bolt
#6-32 x 1 1/4″
Nut
#6-32
01
C
01
- 1 -
- 2 -
STEP 5 Route the cables
- 7 -