SPEED Serial adaptors User guide
The print.spd configuration file
Page 98
The print.spd configuration file
For each port, transparent printing is controlled by an entry in the
print.spd
file. The
print.spd
file is found in the /etc/ directory on your system. The entry for each port includes
definitions of the terminal type, transparent print throughput rate, device name. The content
of the
print.spd
file is normally controlled automatically by either the Port Configuration utility
(SCO OpenServer 5). A sample entry from a typical print.spd file is shown in the next
example.
100 unknown ttyz1 -ixany -ixon
Maximum number of characters per second
throughput for transparent printing
Device name
Terminal type of terminal to which your printer is
attached defined in the printcap.spd file.
Enables flow control for Transparent printing.
Enables sending of data on receipt of the next character
(when flow control is enabled on the transparent print port).
Содержание SPEED Series
Страница 16: ...SPEED Serial adaptors User guide About the SPEED serial adaptor card Page 16 Chapter 1 Introduction ...
Страница 74: ...SPEED Serial adaptors User guide Removing host cards Page 74 Chapter 2 Installing drivers and host cards ...
Страница 86: ...SPEED Serial adaptors User guide SPEED cables available from Perle Page 86 Chapter 3 SPEED Cabling information ...
