Perle SPEED Series, Руководство пользователя

Страница: 23 / 122

SPEED Serial adaptors User guide
Installing under SCO OpenServer
Page 23
Chapter 2 Installing drivers and host cards
Installing device drivers and utilities
To install the SPEED device drivers and utilities for the SCO OpenServer operating system
proceed as follows;
1. Login to your system as super user.
2. Load the CDROM into your system CD drive.
3. At the command prompt, make a directory for your installation by typing:
mkdir /cdrom
4. Mount the CDROM file system using the following commands:
mount -f ISO9660 -r/dev/cd0 /cdrom
5. In the SCO OpenServer desktop, double click on the System Administration folder.
The System Administration window is now displayed.
6. In the System Administration window, double click on the software manager icon.
The Software Manager window is now displayed.
Note
The example above shows the directory name as
/cdrom , You can either use this
name or use another directory name to suit your requirements. For example, /mnt .