Perle MCR1900, Руководство по установке

Страница: 14 / 25

14
Powering On an AC Powered Chassis
To power on an AC powered Chassis, perform the following
procedure.
1.
Using the Perle supplied power cord, plug the power cord into the
AC power connector at the rear of the Chassis (repeat this
procedure if you have a second power supply installed in the
Chassis).
2.
Plug the other end of the power cord to an appropriate power
outlet (repeat this procedure if you have a second power supply
installed in the Chassis).
3.
Turn the power switch(s) to the On position.
Power Supply LED Status
Description LED
On (solid) Indicates that the power has been
switched On and the Power
Supply Module is supplying power
to the Chassis.
Off
z
The Power Supply Module has
been switched Off.
z
The power plug has been
removed.
z
No power at power source.
z
The Power Supply Module has
failed.
Slow Blinking (Only applies to a Dual Power
Supply Chassis). The Power
Supply Modules are establishing
load sharing parameters.