17
Perle IRG5410/5410+Series Router Hardware Installation Guide
Power Management
Overheat Standby
The internal ambient temperature of the router is continuously monitored and if the temperature
remains above the router’s primary high threshold alarm (default is 95
°C/203°F)
setting for 5 minutes,
then your router will enter into Standby mode and remain in standby until the temperature returns to
5
°C/41°F
is below the primary high threshold value for 5 minutes. The high threshold can be config
-
ured within Alarm Manager /Primary/High Threshold menu.
Note:
that any value below 60
°C/140°F
set for this threshold will be ignored and the value of
60
°C/140°F
will be used for the monitoring for overheat standby.
