Installation 13
IDS-306 Hardware Installation Guide
2 Insert the module and push inwards with your thumb until you hear a click. Do not force the SFP
module in. SFP modules are keyed so you can only insert them one way.
3 If the SFP module is equipped with a clasp, ensure the clasp is in the locked position.
4 The appropriate fiber cable can now be connected to the SFP module.
Warning:
In hazardous location installations, failure to remove the power from the source prior to com
-
pleting the connection/s to the SFP slot/s could cause an electrical arc resulting in a possible explosion.
Removing SFPs
SFP modules are inserted in the SFP slots on the front of the IDS switch.
1 Disconnect the fiber cable from the SFP module.
2 If the SFP module is equipped with a clasp, move it to the unlocked position and use the clasp to
pull the SFP towards you.
3 If the SFP module is not equipped with a clasp, then with your fore finger and thumb, firmly grip
the SFP and pull towards you.
Warning:
In hazardous location installations, failure to remove the power from the source prior to
removing the SFP modules from their slots could cause an electrical arc resulting in a possible explo
-
sion.
