Perkins SMART Brailler™ User Manual | Rev: 041814
Internal or USB Files menu. The brailler saves the updated file with a
name composed of the first line (maximum 28 characters of text)
followed by the number 1 in parentheses (1). The number in
parentheses is increased by 1 in the name of each subsequent
selection of Save New, for example, Bobby(1), Bobby(2), Bobby(3). To
start a new file, select New File from the File Menu.
When you turn the brailler off or change users, it saves what you've
typed under the current user from the last time you selected New File.
When you turn the brailler on, it loads any text that was typed from the
last New File selection for the Guest user. If you change to a different
user in the Main Menu or Welcome! Menu, the brailler loads any text
that was typed from the last New File selection for that user and reads
back the text. You must select New File in the File Menu to clear this
text.
Appendix B: Main Menu and Submenus
for more information about the options available for files.
Tips for Naming a File
The file name is the first line of the file or the first 28 characters of text
in a file, if the print version of the line has more than 28 characters. For
example, if you type your name followed by a line space, your name
will be the file name. If you do not want the file name to be on the
embossed braille document, you can insert another piece of paper,
write the desired file name, then remove that paper and insert the
paper for the actual document.
| tel: +1-617-972-7308 | 175 North Beacon Street Watertown, MA USA 02472
34
