Perkins SEBU9068-03 Скачать руководство пользователя страница 106

Страница: 106 / 124

Tighten the vent screw (1) securely . Remove the

wiring harness from connection (4).

Illustration 64

g03374223

Typical example

Using a suitable tool, remove the filter bowl (6).

Rotate the filter assembly counterclockwise in
order to remove the filter assembly. Use a suitable
tool in order to remove the filter assembly.

Rotate the filter element counterclockwise and

remove the filter element (5). Clean the filter bowl.

Install the Element

Illustration 65

g03374224

Typical example

Locate the thread in the filter element (8) onto the

threads (9). Spin on the element. Do not tighten.

Lubricate the O ring seal (7) with clean engine oil.

Do NOT fill the bowl with fuel before the assembly
is installed.

Do NOT use a tool in order to install the filter

assembly. Tighten the filter bowl (6) by hand.
Install the filter bowl (6) and align with your
temporary marks (A).

Tighten the valve (2) securely. Remove the

container and dispose of the fuel in a safe place.

106

SEBU9068-03

Maintenance Section
Fuel System Primary Filter (Water Separator) Element - Replace

Содержание SEBU9068-03




























































































































Результаты поиска

Содержание SEBU9068-03

Отзывы:

Perkins SEBU9068-03, Руководство по эксплуатации и обслуживанию, Страница: 106 / 124

Результаты поиска

Содержание SEBU9068-03

Отзывы: