PCD-FDE2 Setup Guide
Connection diagram
Connections
1. Connect the Power cable from the PCD-FDE2 mini-USB connector to the USB power adapter
using the supplied cable.
2. Connect the included USB / Serial cable to the USB connector of the PCD-FDE2, and the
other side to the Russound controller (DB9 connector) Note: If you are connecting a Russound
CAV, you must change the RS232 switch to the rear position.
3. Connect the included Ethernet cable to either (LAN or WAN) RJ45 connector on the PCD-
FDE2, and the other side to your wireless router.
