PerkinElmer Wallac 1420, Руководство пользователя

Страница: 92 / 171

Tools menu
90
Filters
In the enhanced security mode this tool is enabled only for users who belong to the Editor
user group.
In this window there are three tabs: "Emission Filters", "CW-Lamp Filters" (i.e. continuous
wave lamp excitation filters) and "Filter Slides" (including filter wheels). "Filter Slides"
allows you to specify the slides for emission and CW-lamp filters. The names of the filters
or slides in the currently selected tab are displayed. Names of user defined filters can be
freely defined by the user but names of factory preset filters cannot be changed.
There are four buttons at the bottom of the window:
Add - add a new item to the list available e.g. a new filter (not available for slides). Give the
name and edit the properties. It will appear with a new icon showing it is different from a
default item.
Copy
- (select an item to activate this, not available for slides). Make a copy of an item. It
will appear with a new icon showing it is different from a default item, and the name will be
preceded by the words “Copy of”. You can give it a different name and edit other
parameters by selecting
Properties .
Remove - (select a user created item to activate this; not available for slides). Remove the
selected item from the list. You cannot remove a pre-set item from the list nor can you
remove a filter that has been assigned a position in a slide. This command requires
confirmation because you cannot undo
Remove .
Properties - (select an item to activate this). View the properties of the selected item. If the
item is user defined then you can edit the properties, but if it is a factory pre-set, you cannot
edit them.