PerkinElmer PINAACLE 900 Series, Руководство по оборудованию и обслуживанию для клиентов

Страница: 213 / 390

197
Instrument Maintenance Checklist
Instrument Maintenance Checklist
To properly maintain the spectrometer instrument, do the following as required:
• Clean the exterior of the instrument.
• Inspect and clean any fans and filters.
• Monitor tank pressures
• Inspect the burner assembly (see checklist later in this chapter).
• Inspect the drain system.
• Inspect the cooling system for proper operation.
• If the intensity of the deuterium arc background corrector source is too low,
refer to the troubleshooting information in the Troubleshooting chapter of this
manual. The background corrector source lamp may need to be realigned or
replaced.
• Normally, the spectrometer optics will require little or no maintenance.
However, low energy lamp readings, or noisy or erratic results may indicate
that the optics require cleaning or alignment. This should only be done by a
PerkinElmer service engineer.
• The windows in the burner sample compartment need to be inspected and
cleaned as necessary with a mild detergent or isopropanol.
Caution
Flame should be turned off while performing the instrument
maintenance checklist.
Caution
If optic surfaces become dirty (e.g., from exposure to
laboratory vapors), cleaning should be done only by a
PerkinElmer service engineer.