Perkin-Elmer XRpad2 4336 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 67

Perkin-Elmer XRpad2 4336 Скачать руководство пользователя страница 5

D

IGIT

AL

I

MAGING

68153 01

www.perkinelmer.com

v

XRpad2 4336

For Your Safety

Interface and Power Unit and Cables

WARNING

Be sure to turn OFF the power of the X-ray detector, including turning
off the power supply or removing the battery (if applicable) before
servicing, maintaining, connecting, or disconnecting the cables or
accessories.

Do not touch the power supply, Lithium Battery Pack, X-ray detector,
cable, connector, or any other electrical component or equipment with
wet hands. Ignoring this warning may cause electrical shock, which
may result in severe personal injury, death, or substantial product
damage.

WARNING

Disconnect the cables by pulling on the connector and not the cable
itself. Ignoring this warning may cause electrical shock, which may
result in severe personal injury, death, or substantial product damage.

WARNING

Do not modify the cables or subject the cable to external stress or
damage. Avoid placing anything heavy, including the detector, on the
cable, stepping on the cable, pulling the cable, or subjecting the cable
to excessive bending or bundling. Ignoring this warning may cause
cable failure resulting in electrical shock, which may result in severe
personal injury, death, or substantial product damage.

WARNING

Do not turn ON the power supply or X-ray detector when
condensation is on the X-ray detector or any of its components or
accessories. Ignoring this warning may cause electrical shock, which
may result in severe personal injury, death, or substantial product
damage.

WARNING

To avoid risk of electric shock, this equipment must only be connected
to a supply mains with protective earth.

«
...
3
4
5
6
7
...
»

Содержание XRpad2 4336




































































Отзывы:

Нет отзывов