Perkin-Elmer XRpad2 4336 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 67

Perkin-Elmer XRpad2 4336 Скачать руководство пользователя страница 37

68153 01

www.perkinelmer.com

21

XRpad2 4336

D

IGIT

AL

I

MAGING

8.5.2.1

Cleaning the XRpad IPU-2

If the XRpad IPU-2 (Interface and Power Unit) surface is dirty or dusty, clean it with a cleaning

cloth dampened with ethanol or a diluted neutral detergent. If you are using a disinfectant other

than those specified, we recommend you consult a specialist for the procedure for disinfection.

Turn off the XRpad IPU-2, and disconnect the AC power cable, detector power, and detector

communication tethered cables before cleaning.

8.6

Minimum System Requirements

The following are the minimum requirements for the host computer that controls the X-ray
detector.

1

Gigabit Ethernet Infrastructure and a free Gigabit Ethernet Port or Wi-Fi Infrastructure.

2

Intel compatible Multi Core Processor (> 2 GHz).

3

RAM > 4 GB.

4

Windows 7 (32-bit/64-bit).

5

If a Firewall is used, make sure that it allows a connection to the detector.

6

Access Point:

a

WPA2 encryption support.

b

802.11n standard with 20 MHz channel bandwidth 36-48, 52-64, 100-116, 132-140,

149-165.

c

MIMO 3x3.

d

Complying with IEC 60601-1 or IEC 60950-1.

WARNING

When the Interface Power Unit is going to be cleaned, be sure to turn
off the XRpad IPU-2 (Interface and Power Unit), and unplug all cables.
Never use thinner, benzine, acetone, or other flammable cleaning
agents. Ignoring this warning may result in explosion, fire, or electric
shock, which may result in severe personal injury, death, or
substantial product damage.

«
...
35
36
37
38
39
...
»

Содержание XRpad2 4336




































































Отзывы:

Нет отзывов